NJM2904C / NJM2904CA

- 2 - Ver.12

■ ABSOLUTE MAXIMUM RATINGS ( Ta=25˚C )

PARAMETER SYMBOL RATINGS UNIT Supply Voltage V+ - V- +32 V Differential Input Voltage (Note4) VID ±32 V Input Voltage (Note5) VIN V- - 0.3 to V- + 32 V Output Terminal Input Voltage Vo V- - 0.3 to V+ +0.3 V

Power Dissipation PD

SOP : 690 (Note6) 1000(Note7) DMP : 470 (Note6) 600 (Note7) MSOP : 510 (Note6) 680 (Note7) SSOP : 430 (Note6) 540(Note7) EQFN : 440 (Note8) 680(Note9)

mW

Operating Temperature Range Topr -40 to +125 ˚C Storage Temperature Range Tstg -65 to +150 ˚C

(Note4)Differential voltage is the voltage difference between +INPUT and -INPUT. (Note5) Input voltage is the voltage should be allowed to apply to the input terminal independent of the magnitude of V+.

The normal operation will establish when any input is within the Common Mode Input Voltage Range of electrical characteristics. (Note6) EIA/JEDEC STANDARD Test board (76.2 x 114.3 x 1.6mm, 2layers, FR-4) mounting (Note7) EIA/JEDEC STANDARD Test board (76.2 x 114.3 x 1.6mm, 4layers, FR-4) mounting (Note8) EIA/JEDEC STANDARD Test board (101.5 x 114.3 x 1.6mm, 2layers, FR-4) mounting (Note9) EIA/JEDEC STANDARD Test board (101.5 x 114.3 x 1.6mm, 4layers, FR-4) mounting

■ELECTRICAL CARACTERISTICS

(V+=5V, V-=0V, Ta=25ºC, unless otherwise noted.)

PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT

Supply Current (All amplifiers) ISUPPLY V+=5V, no signal - 0.7 1.2

mA V+=30V, no signal - - 2

Input Offset Voltage VIO RS=0Ω - 0.5 7

mV RS=0Ω , NJM2904CA - 0.5 2

Input Bias Current IB - 20 150 nA Input Offset Current IIO - 2 30 nA Open-Loop Voltage Gain AV RL≥2kΩ 94 100 - dB Supply Voltage Rejection Ratio SVR V+=5 to 30V,Rs<10kΩ 65 100 - dB Common Mode Input

VICM V+=30V, CMR>70dB 0 - V+-1.5 V Voltage Range Common Mode Rejection Ratio CMR Rs<10kΩ 70 100 - dB Output Source Current ISOURCE V+=15V,Vo=+2V, VIN+=1V, VIN-=0V 20 40 - mA

Output Sink Current ISINK V+=15V,Vo=+2V, VIN+=0V, VIN-=1V 10 20 - mA V+=15V,Vo=+0.2V, VIN+=0V, VIN-=1V 12 50 - μA

High-level output voltage VOH RL=2kΩ,V+=30V 26 27 -

V RL=10kΩ,V+=30V 27 28 -

Low-level output voltage VOL RL=10kΩ - 5 20 mV Slew Rate SR V+=15V,VIN=0.5 to 3V,CL=100pF - 0.6 - V/μs

Gain Band Width Product GBW V +=30V,f=100kHz,VIN=10mVrms,RL=2kΩ,

CL=100pF - 1.1 - MHz

Total Harmonic Distortion + Noise THD+N f=1kHz,Gv=20dB,RL=2kΩ,Vo=2Vpp,CL=100pF - 0.02 - % Equivalent input noise voltage en f=1kHz, Rs =100Ω,V+=30V - 30 - nV/√Hz Channel Separation CS 1kHz< f <10kHz - 120 - dB